MOBOTIX D12
cameraentree General Event Settings
Activity
Value
Explanation
Arming
Enable
Off
SI Open (high)
SI Closed (low)
Arming
:
Arming for Recording, Actions and Messaging:
Enable
: activate all.
Off
: deactivate all.
SI
: arming controlled by signal input.
CS
: arming controlled by custom signal as defined below.
From Master
: copies Main Event Arming state from master camera.
Slave Mode
: full arming slave mode.
Note:
Configuring arming sources as
From Master
or
Slave Mode
requires you to properly configure and enable
Master/Slave
below.
Camera operates in full
Arming Slave Mode!
Arming controls for
Recording
,
Actions
and
Messaging/Messaging 2
are implicitly set to
From Master
.
(no time table)
Weekdays_Mo-Fr
Weekend_Sa-So
Opening_Times
Closing_Times
MxFallback
Time Table Profile
:
Time table profile for time-controlled arming. (
Time Tables
)
General Settings
Value
Explanation
Event LED Setup
Don't flash LEDs
Flash on any event
Flash on recorded events
Flashing LEDs
:
Controls LED flashing.
Set LEDs in
LED Setup
to
Event
for this feature.
Don't blink
Blink, if armed
Blink, if not armed
Blink, if Recording is armed
Blink, if Recording is not armed
Blink on recording
Blink during Recording dead time
Blink, if Actions is armed
Blink, if Actions is not armed
Blink, if Messaging is armed
Blink, if Messaging is not armed
Blink, if Messaging 2 is armed
Blink, if Messaging 2 is not armed
Blinking LEDs
:
Controls LED blinking.
Set LEDs in
LED Setup
to
Event
for this feature.
Arming Delay
0 s
5 s
10 s
15 s
20 s
25 s
30 s
45 s
60 s
75 s
90 s
Arming Delay
:
Delay of arming by signal input in seconds.
0 s
5 s
10 s
15 s
20 s
25 s
30 s
45 s
60 s
75 s
90 s
Disarming Delay
:
Delay for disarming by signal input in seconds.